• Product Introduction:

Xinghe Brand S11 and S13 series 10 KV oil-immersed distribution transformers are new products that meet international standards.

The products use imported high permeability cold-rolled silicon steel sheets, protective resin covering the surface of the iron core and vacuum drying technology to prevent moisture and rust; the product adopts The non-hanging structure can withstand the bumps during transportation to the greatest extent and is one of the most energy-saving products produced by the company.

• Good technical and economic performance

On the basis of S9 series, S11 series products reduce the no-load loss by 30% on average; no-load current is reduced by 70-85% compared with S9; It can still operate for a long time under the conditions of high temperature; the operating noise of the product is reduced by 2-4 decibels on average.

• High-quality materials

1. The oil-immersed transformer uses oxygen-free copper wire with lower resistivity, and after a series of additional surface treatments, it is smoother and has no burr sharp corners, so that the load loss of the transformer is lower and the electrical performance is more reliable.
High-quality silicon steel sheets are selected, and with the improvement of performance level, silicon steel sheets with lower unit loss are used, so that the no-load loss of the transformer is lower.
2. Select high-quality laminated wood insulation, never crack
3. The transformer oil that has been deeply filtered is selected, which has lower water, gas and impurity levels, and the transformer works more reliably.
4. Use high-quality rubber sealing materials to effectively prevent aging and prevent leakage.
5. All raw materials have been strictly examined according to the national standard ISO9000.

• How do transformers been shipped?

  Transformers always been delivered by ship,train or truck for oversea,which with main active body in bulk and accessories in wooden cases.

• Can your product be customerized?

  Considering differences in voltage, frequency and other speciality of transformer product in different countries and regions,our product can be customerized according to your requirements.

• Do you offer guarantee for the products?

  Yes. We offer at least two years guarantee for all of our transformers.

• Do you accept FAT(Factory Acceptance Test)?

  Yes. It’s available. We are responsible for each set transformer’s testing.

• Do you assign engineer for after-sale service?

  Yes. For our products,we all show after-sale guide installation and question inquiry